Welcome to Fancheng Machinery Parts; E-mail: max@delson-get.com
Facebook Twitter Youtube Instagram Linkedin Whatsapp
Manufacturing process of bucket teeth
2023-05-05
Small Excavators
How to Deal With Small Excavators Under High Temperature Conditions?
2023-05-08

The Replacement of the Excavator Bucket Teeth

Excavator bucket teeth, like human teeth, are important wearing parts of excavators. It is a bucket tooth composed of a tooth tip and a tooth seat, and the two are connected by pins. Since the worn part of the bucket teeth is the tooth tip, just replace the tooth tip.

The Replacement of the Excavator Bucket Teeth

Tooth replacement cycle

  • The construction environment of the excavator directly determines the wear degree and replacement frequency of the bucket teeth. For example, excavators are used for earthwork or sand and soil engineering, and they are replaced almost twice a year, because the degree of wear and tear will be much smaller.
  • However, if it is a quarry or rock project, the replacement cycle will be much shorter, especially for hard rock such as granite. Replacing it once a week is the order of the day. Therefore, the quality of the tooth, the surgical method and the construction environment determine the quality of the tooth. Replacement time.

Which is better when replacing teeth?

  • General tooth:
    The hardness and toughness of the particles are moderate, and the working conditions are average.
  • Teeth for minerals:
    High hardness, moderate impact toughness, used for severe impact conditions.
  • Special teeth:
    High hardness, high impact toughness, used in severe wear and impact conditions.

How to maintain bucket tooth and bucket tooth seat?

  • First of all, choosing the right bucket teeth is an important factor to prolong the service life of the excavator and enhance the penetration, because the matched bucket teeth and their accessories are the premise of speeding up the working cycle of the excavator and saving raw materials.
  • Secondly, during the use of excavator bucket teeth, the outermost layer of bucket teeth wears 30% faster than the innermost wear. Therefore, after a period of time, the position inside and outside the bucket can be changed or rotated by a certain angle. To ease and increase productivity.
  • Then, when operating the excavator, it is best to dig under the bucket teeth perpendicular to the working face, so as not to break the bucket teeth due to excessive inclination.
  • Finally, tungsten coatings on bucket teeth and other accessories can effectively reduce maintenance costs and improve machine efficiency.
  • We specialize in producing teeth, adapters, side mills, cutting blades, bucket protectors and fasteners for a variety of different earthmoving equipment and applications.