When an excavator needs to be transferred to a job, we need to transport the mini excavator to its destination. A mini crawler excavator is not a machine that can be walked on the road for a long time, because it can cause damage to the machine. So in the process of transportation, we need to do lifting and trucking to the destination, but in these processes we need to pay attention to many things and need to pay extra attention.
Before the excavator needs to be transported, we first have to lift the excavator for loading. During the lifting process, anyone on the excavator must make sure that the wire rope we are lifting can hold the weight of the excavator and that it is stable during the lifting process. Once the mini excavator is unstable in the center, it will rotate during the lifting process. During the lifting process, the starting engine drives the upper part of the rotary body to rotate. At this time, the work device of the excavator will be on the ground through the wire rope on the front and rear axle of the excavator.
The excavator is loaded. During loading, first stop the excavator to the designated position, then lower the dozer, turn off the engine, pull out the key, let the bucket and dry bean cylinder all extend, and lower the movable arm. Keep the mini excavator stable during transportation without tipping over. When loading, take care to place square logs in the bucket and cylinder to avoid damaging the body during transport.
When the excavator is transported to its destination, it needs to be unloaded. When unloading, be extra careful to run the mini excavator’s generator at low speed and walk slowly. Use the ramp to keep the trailer at a certain distance from the mini excavator. Or platform to load and unload the excavator. Do not change direction while unloading. If you have to change direction, you must correct the direction as you descend the ramp. Such careful operation is to ensure the personal safety of our operators from damage to the mini excavator.