During the construction process of excavators, it is inevitable that the engine suddenly stalls or dies during the work. What to do when you encounter this situation? Today bucket teeth wholesale will teach you how to deal with excavator stalling.
First of all, check the oil circuit of the excavator, whether the oil pipe delivery is normal and whether the oil pipe is blocked. In this case, you should clean the oil filter chip, remove the oil supply pump and check whether the injector’s injection length can reach 6-7cm.
Secondly, we should pay attention to whether the excavator’s fuel machine is working for a long time, which leads to overload of the fuel machine, thus leading to high temperature of the fuel machine and causing the fuel machine to stall.
In addition to the above two points, the excavator can not move. Most cases are fuel channel failure. You should also observe whether the fuel pipe has air leakage and oil seepage, and then observe whether there are cracks at the seal of the fuel supply pipe joint, whether the filter element is blocked, and whether the water cap of the oil separation device is tightened.
On the other hand, if the excavator stalls and does not move, it may also be a power condition. The hydraulic pump is not compatible with the efficiency of the fuel engine. At that time, it needs to be tested with customized management equipment, and the control valve reaction force must be checked and maintained with customized equipment.